Tools

Rotary Cutter Blade Only. Extra cutting blade.

2-LB small anvil. Great support surface when you need it! Can be used for support when setting rivets.
Hammering surface: 1-7/8" X 3-1/4"
Overall length: 5-1/4"
Height: 2-1/2"
Base: 1-7/8" X 2-7/8"

14 oz Poly Mallet for use with cutting punches. This mallet will protect the tool because the poly head will absorb the shock while striking the tool. Never use a metal hammer with cutting punches!

Adjustable slot punch for cutting parallel slots for
hardware that attaches with prongs. Cutting punch
is easily adjustable with one screw! Slots can be adjusted from 1/4" - 15/16" and punch up to 7/16" deep. Handle is 3" long.

Maxi punch set with 6 punch tubes and universal handle. Punch sizes: 3/64", 13/64", 7/32", 1/4", 17/64", 5/16 ".

Mini punch set with 6 punch tubes and universal handle.
Punch sizes: 5/64 ", 3/32", 1/8", 9/64", 5/32", 11/64".

Shoe eyelet tool for peening shoe eyelets. See our
selection of eyelets in the Miscellaneous section.

Oblong hole cutting punch. Great for cutting oblong holes needed for belt buckle tongues.
Three sizes available: 1/2", 3/4" and 1".

Revolving leather punch with 6 cutting tubes. This is an
inexpensive revolving punch, great for punching belt holes. Note: tubes can not be replaced.

Lace maker for making your own laces. Makes laces out of a solid square of leather. Easy to use with little practice. Great for making leather laces for braiding and other projects.

Extra blades for the lace maker. Sold 10 blades per bag.

This Strap cutter is an exceptional tool for cutting straps to any given width. This is a professional quality tool you will love to own!

Extra blades for the strap cutter. Sold 5 blades per bag.

Edge Bevelers for carving leather edges before you burnish the edge. These tools give a professional finish to your leather project. Two sizes available: #2 (chamfer-style) carves a straight slant while beveling and is great for curves and tight spots. The #3 has a quarter-round profile and is great for heavy leather. The #3 makes it easier to get a high quality burnished edge. For burnishing the edge purchase the"Bone Folder" sold below.

Bone folder for burnishing the edges of leather for a smooth edge finish. The main stick portion is great for flat surfaces and the top has several shaped slots for edges. Made from nylon. This is a "must have" tool !

Adjustable creaser for embossing or adding lines to leather. The creaser edge has an adjustable thumb screw to easily set the width of the crease lines.

Rivet setter, another very standard tool. This setter has a slight concave area on one end, intended to match the head size on all of our rivets except our largest "Jiffy Rivet" (12mm x 11mm).

Rivets to use with this tool.

Rivet setting too for setting (peening) wheel rivet axles and other tubular style rivets. Heavy duty made from hardened steel.

Automatic sewing awl is great for stitching thick leather.
This awl comes with two needles and a spool of black
waxed sewing thread. If you need to do a quick sewing
repair, this is the tool for the job ! Extra thread and needles order items below.

Extra thread and needles for automatic sewing awl.
Waxed thread available in Black, Brown or White.
Needles available in straight or curved.

Rawhide Lacing Needle. This 6" long heavy duty steel needle has a threaded end where a rawhide lace can be inserted. Needle will hold 1/16" to 1/8" thick rawhide lace.